Versand

Montageanleitungen für Griffe, Knöpfe und Wandhaken

Unten finden Sie verschiedene Montagemöglichkeiten für alle unsere Knöpfe, Griffe und Wandhaken.

Montage von Knöpfen

- Markieren Sie auf der Schranktür die Stelle, an der der Knopf montiert werden soll, generell etwa 4-5 cm auf jeder Seite der Ecke.

- Bohren Sie die Löcher von der Außenseite der Tür aus. Der Durchmesser der Löcher sollte 4 bis 5 mm betragen, für eine 4-mm-Schraube.

- Befestigen Sie die Schrauben von der Innenseite der Tür aus mit einem Schraubenzieher.

Assembly of knobs

1. Mark where on the cabinet door the knob is to be mounted, usually about 4-5 cm from each side of the corner. 2. Drill a hole from the outside of the door, suitable for a 4 mm screw. 3. Place the knob on the outside of the door and fasten the knob with a screwdriver from the inside.

Assembly of handles

1. Mark where to drill the holes to match the "CC" measurement mentioned under specifications. 2. Drill the holes from the outside of the door. We recommend the holes to be 4-5 mm in diameter, suitable for a 4 mm screw. 3. Fasten the screws from the inside of the door with a screwdriver.

Assembly of wall hooks

1. Screw the dowel screw all the way into the hook. 2. Drill a hole in your wall, use the appropriate plug for your wall type (not included). 3. Screw the hook into the hole (or hole with plug).

Montage von Griff

- Markieren Sie die Stelle, an der die Löcher gebohrt werden sollen, damit sie mit dem in den Spezifikationen genannten Maß "CC" übereinstimmen.

- Bohren Sie die Löcher von der Außenseite der Tür aus. Der Durchmesser der Löcher sollte 4 bis 5 mm betragen, für eine 4-mm-Schraube.

- Befestigen Sie die Schrauben von der Innenseite der Tür aus mit einem Schraubenzieher.

Montage Wandhaken

1 - Schrauben Sie die Dübelschraube bis zum Anschlag in den Haken.

2 - Bohren Sie ein Loch in Ihre Wand, verwenden Sie den passenden Dübel für Ihren Wandtyp (nicht im Lieferumfang enthalten).

3 - Schrauben Sie den Haken in das Loch (oder das Loch mit Dübel).